Reliable CDCP Cram Materials & CDCP Exam Registration

We have professional technicians examine the website every day, and if you purchase CDCP learning materials from us, we can offer you a clean and safe online shopping environment, and if you indeed meet any questions in the process of buying, you can contact us, our technicians will solve the problem for you. Moreover, CDCP Exam Braindumps of us contain most of knowledge points for the exam, and they will help you pass the exam successfully. We also pass guarantee and money back guarantee if you fail to pass the exam after buying CDCP learning materials from us.

EXIN CDCP Exam Syllabus Topics:

Topic	Details
Topic 1	Designing a Scalable Network Infrastructure: It covers ANSI TIA-942 cabling hierarchy, network redundancy, structured Cabling System, and planning considerations.
Topic 2	Water Supply: This topic is all about water supply techniques and application areas.
Topic 3	Physical Security and Safety: Sub-topics are about physical security considerations and physical safety considerations.
Topic 4	Light: This topic covers light fixture types and placement, emergency lighting, and emergency Power Supply (EPS).
Topic 5	Cooling Infrastructure: The topic focuses on liquid immersion cooling, supplemental cooling options, sensible and latent heat definitions, and temperature and humidity recommendations.
Topic 6	Power Infrastructure: It focuses ATS and STS systems, redundancy levels and techniques, static and dynamic UPS systems, battery types, thermo-graphics, and renewable energy factor (REF).
Topic 7	Data Centre Location, Building and Construction: It focuses on appropriate sites and components of an effective data centre and supporting facilities setup.
Topic 8	Auxiliary Systems: The topic covers water leak detection systems, data centre monitoring requirements, EMS, BMS and DCIM.
Topic 9	Electro Magnetic Fields: The topic deals with effects of EMF on human health and equipment (H)EMP, standards, and EMF shielding solutions.
Topic 10	Equipment Racks: It discusses power rail strip options, security considerations, and rack standards, properties and selection criteria.
Topic 11	Raised Floor Suspended Ceiling: The topic discusses applicable standards, signal reference grid, and disability act and regulations.

>> Reliable CDCP Cram Materials <<

CDCP Exam Registration, CDCP Valid Exam Registration

As candidates, the quality must be your first consideration when buying CDCP learning materials. We have a professional team to collect the first-hand information for the exam. Our company have reliable channel for collecting CDCP learning materials. We can ensure you that CDCP exam materials you receiveare the latest version. We have strict requirements for the CDCP Questions and answers, and the correctness of the answers can be guaranteed. In order to serve our customers better, we offer free update for you, so that you can get the latest version timely.

EXIN Certified Data Centre Professional (CDCP) Sample Questions (Q16-Q21):

NEW QUESTION # 16
Which Class of Fire involves combustible metals or combustible metal alloys such as magnesium, sodium and potassium?

A. Class A
B. Class D
C. Class B
D. Class C

Answer: B

Explanation:
Class D fires involve combustible metals or combustible metal alloys such as magnesium, sodium and potassium. These metals can react violently with water, air, or other chemicals, and require special extinguishing agents1 References: 1: EPI Data Centre Professional (CDCP®) Reference Materials, page 16.

NEW QUESTION # 17
How many monitoring points should be used in Temperature Measurement?

A. 0
B. 1
C. 2
D. 3

Answer: B

Explanation:
According to the EPI Data Centre Professional (CDCP®) Reference Materials, the recommended number of monitoring points for temperature measurement in a data centre is 3 per rack: one at the top, one at the middle, and one at the bottom1. This is to ensure that the temperature distribution within the rack is uniform and within the acceptable range for the equipment. The temperature sensors should be placed at the front of the rack, where the air enters the equipment, and not at the back, where the hot air exits1.
References: 1: EPI Data Centre Professional (CDCP®) Reference Materials, page 23.

NEW QUESTION # 18
The termination of the ability of a product to perform its required function can be defined as.

A. Hindrance
B. Obstacle
C. Termination
D. Failure

Answer: D

Explanation:
According to the EPI Data Centre Professional (CDCP®) Preparation Guide, failure is defined as "the termination of the ability of a product to perform its required function" (page 9). Failure can occur due to various reasons, such as wear and tear, design flaws, human errors, environmental factors, or external events.
Failure can affect the availability, reliability, and performance of a product, system, or service.
References:
*EPI Data Centre Professional (CDCP®) Preparation Guide, page 9
*What is Failure? | Definition from WhatIs.com

NEW QUESTION # 19
What is the current recommended temperature for ICT equipment as described in the ASHREA TC 9.9 guideline?

A. 20-40 °C (68 - 104 °F)
B. 18-27 C (64.4 - 80.6°F)
C. 8-18 C (46.4 -64.4 °F)
D. 25-45 °C (77 - 113 °F)

Answer: B

Explanation:
The current recommended temperature for ICT equipment as described in the ASHRAE TC 9.9 guideline is
18-27 C (64.4 - 80.6°F). This is the recommended range for the dry-bulb temperature at the inlet of the servers, which is the most critical parameter for ensuring the optimal performance and reliability of the ICT equipment. The recommended range is based on the thermal specifications of the majority of the ICT equipment in the market, as well as the energy efficiency and environmental considerations of the data centre cooling systems. The recommended range is suitable for Classes A1 to A4 of the ASHRAE thermal guideline classes, which cover different types and generations of ICT equipment.
References:
1: 2021 Equipment Thermal Guidelines for Data Processing Environments - ASHRAE2, page 1, Table 2.1 3:
ASHRAE TC9.9 Data Center Power Equipment Thermal Guidelines and Best Practices4, page 10, section 2.1
5: Does your Data Center Follow ASHRAE TC 9.9 Thermal Guidelines for Data Processing Environments?6, page 1, section 1

NEW QUESTION # 20
is the degree to which a system or component is operational and accessibility when required for use.

A. Scalability
B. Availability
C. Reliability
D. Agility

Answer: B

Explanation:
Availability is the degree to which a system, product or component is operational and accessible when required for use. It is one of the attributes of reliability, which is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. Availability can be calculated as the ratio of the expected value of the uptime (the time when the system is functional) to the total time (uptime plus downtime) of a system or component. Availability can also be influenced by factors such as maintainability, fault tolerance, redundancy, diagnostics, and logistics.
References: EPI Data Centre Professional (CDCP) Preparation Guide, page 8; Availability - Wikipedia; Reliability - ISO 25000.

NEW QUESTION # 21
......

Our CDCP real exam is written by hundreds of experts, and you can rest assured that the contents of the CDCP study materials are contained. After obtaining a large amount of first-hand information, our experts will continue to analyze and summarize and write the most comprehensive CDCP learning questions possible. And at the same time, we always keep our questions and answers to the most accurate and the latest.

CDCP Exam Registration: https://www.testkingfree.com/EXIN/CDCP-practice-exam-dumps.html